3
Chapter 1 Safety Instructions
Always follow these safety instructions when using the product:
1 Operation
1.1 Please use the product in the recommended operating environment.
1.2 Do not place product in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use this product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on the product. If you are not sure of the type of power
available, consult your distributor or local electricity company for advice.
1.7 Always take the following precautions when handling the plug. Failure to do so may result in
sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
1.8 Do not overload wall sockets, extension cords or multi-way plug boards to avoid potential
risks.
1.9 Do not block the slots and openings in the case of product. They provide ventilation and
prevent the product from overheating.
1.10 Except as specifically instructed in this User Manual, do not open or remove covers,
otherwise it may expose you to dangerous voltages and other hazards. Refer all servicing to
licensed service personnel.
1.11 Unplug the product from the wall outlet and refer servicing to licensed service personnel when
the following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the product or the product has been exposed to rain or water.
2 Storage
2.1 Do not place the product where the cord can be stepped on as this may result in fraying or
damage to the lead or the plug.
2.2 Never push objects of any kind through cabinet slots. Never allow liquid of any kind to spill into
the product.
2.3 Unplug this product during thunderstorms or if it is not going to be used for an extended
period.
2.4 Do not place this product or accessories on top of vibrating equipment or heated objects.
3 Cleaning
3.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use liquid or
aerosol cleaners.
4 Remote control (if the accessories are equipped with remote control)
4.1 Using an incorrect battery type in the remote control may result in breakdown. Follow local
instructions on how to dispose of used batteries.
FCC Warning
This product has been tested and found to comply with the limits for a Class A computer device, pursuant
to Article 15-J of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a commercial environment.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out
in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de
Classe A prescrites dans la norme sur le material brouilleur: “Appareils Numeriques,” NMB-003 edictee par
l’Industrie.
To Next Page
Loading...
Need help?
General