EasyManuals Logo
Home>Lumiscope>Massager>2000-T

Lumiscope 2000-T User Manual

Lumiscope 2000-T
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
2000-T-INS-LAB-RevC14 11
BATTERY INFORMATION
When the yellow indicator light on the front of the unit no longer illuminates,
the battery has become too weak to power the unit, and the existing battery
shouldbereplacedwithanewbattery.Atthispoint,theunitwillturnOFF
until a new battery is inserted.
s CAUTION: GF Health Products, Inc. recommends the use of only a 9V
alkaline battery with this device.
Replacing the Battery
When the yellow indicator light on the front of the unit no longer illuminates,
the battery should be replaced.
1. TurnunitOFF.
2. Remove the front panel cover by pressing on the top of the panel and
pressing down in order to slide the panel down. Continue sliding the
panel downwards until the panel is completely removed from the unit.
This will reveal the battery compartment.
3. Remove the discharged battery from the device.
4. Place new battery in the compartment.
Note: Ensure the proper polarity (+ and –) markings match the markings in the
device.
5. Replace the front panel cover.
6. Dispose of the old battery according to local guidelines and regulations.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lumiscope 2000-T and is the answer not in the manual?

Lumiscope 2000-T Specifications

General IconGeneral
BrandLumiscope
Model2000-T
CategoryMassager
LanguageEnglish