Lumiscope 2000-T User Manual

2000-T-INS-LAB-RevC14 14
TECHNICAL SPECIFICATIONS
Channel
Dual, isolated between channels
Modes of Operation
Burst, Continuous, and Modulation
Pulse Intensity
Adjustable 0 mA – 80 mA peak into 500 ohm load each
channel, constant current
Pulse Rate
2 Hz-120 Hz (adjustable)
Pulse Width
40uS-260uS (adjustable)
Burst Mode
Burst consists of 2 bursts per second at 100 Hz
Wave Form
Asymmetrical bi-phasic square pulse
Voltage
0–100Volt(opencurrent)
Power Source
9-Voltbattery
Dimensions
95mmx65mmx23.5(heightxwidthxthickness)
Weight
115 g (including battery)
OUTPUT SPECIFICATIONS
Mode Intensity
(mA)
Pulse Width
(uSec)
Pulse Rate
Frequency (Hz)
Cycle Time
(Sec)
Burst
Adj. 0-80 Adj. 40-260 100 Hz fixed
2 bursts per Sec
N/A
Continuous
Adj. 0-80 Adj. 40-260 Adj. 2-120 Hz N/A
Modulation
Adj. 0-80 Modulates
down from
preset width
setting by 60%
then back to
original setting
Adj. 2-120 Hz 5 Sec total
time
Note: All values have ±20% tolerance.

Lumiscope 2000-T Specifications

General

Brand	Lumiscope
Model	2000-T
Category	Massager
Language	English