1 2
[ 63 ][ 62 ]
Note: The shade will automatically travel
to the fully open then closed positions.
This sets the new limits.
Note: The shade will jog at 6 seconds.
CONTENTS
Troubleshooting
Setting Limits: Excluding Roller Blinds .......................................................................63
Setting Limits: Roller Blinds only .............................................................................64
Performing a Programming Reset ...........................................................................65
Backing up the Hub .........................................................................................66
Emailing a Hub Backup ......................................................................................67
Restoring a Hub Backup .....................................................................................68
Frequently Asked Questions (FAQ’s) .........................................................................70
Scenario 1 ...................................................................................................76
Scenario 2 ...................................................................................................77
Scenario 3 ...................................................................................................78
Scenario 4 ...................................................................................................80
Scenario 5 ...................................................................................................81
Setting Limits: Excluding Roller Blinds
Limits identify the position that shades stop when fully open or fully closed. Limits are set at the
factory for the correct stop positions according to the ordered height.
NOTE: This procedure adjusts limits only. Shade programming is retained, including Group (1-6)
number assignments on a remote(s) and shade status in the PowerView® App.
2
RELEASE the manual control
button when shade jogs.
Manual Control
Button
Headrail
PRESS and HOLD the manual
control button on the headrail for 6
seconds.
Manual Control
Button
Headrail
To Next Page
Loading...
Need help?
General
