LuxaFlex PowerView Pebble User Manual

2
SELECT desired Group number
(1-6).
Note: Shade will jog to indicate
this position is the new Favorite
position.
2
PRESS and RELEASE desired Group
number (1-6).
Note: Shade will jog to indicate
it has been successfully
removed from the selected
Group.
1
1
[ 10 ] [ 11 ]
Manual Control
Button
Headrail
PRESS and HOLD n (Stop) on
remote until indicator lights blink.
Joining a Shade to a Group
To operate shades using a remote, shades must be joined to a Group number (1-6) on the remote.
A single shade can be joined to multiple Groups on a remote, if desired.
Manual Control
Button
Headrail
4
3
Note: To position additional shades,
repeat step 3 for each shade while
remote is in Programming Mode.
a. PRESS and HOLD manual control button on shade headrail. Then...
b. PRESS and RELEASE Open on remote.
RELEASE manual control button on
shade headrail.
4
a. PRESS and HOLD manual control button on shade headrail. Then...
b. PRESS and RELEASE Close on remote.
PRESS and HOLD n (Stop) on
remote until indicator lights blink.
Removing a Shade from a Group
Manual
Control
Button
Headrail
3
Manual Control
Button
Headrail
Note: To remove additional shades
from the same Group, repeat step
3 for each shade while remote is in
Programming Mode.
RELEASE manual control button on
shade headrail.
RELATED TOPICS
RELATED TOPICS

LuxaFlex PowerView Pebble Specifications

General

Brand	LuxaFlex
Model	PowerView Pebble
Category	Home Automation
Language	English