10
Spa System Components
A. Filter Skimmer/Weir Door:
Removes floating
debris from the water surface, provides a water return
path to equipment, and houses water filter element.
B. Topside Control Panel:
Used to control
temperature setting, pump for jets, and light
.
C.
Air Controls:
Increases or decreases air entering
the jets. Close during heating for maximum
efficiency.
D. Diverter Jet: Used to direct the flow of water
from the whirlpool jet to the open seating area jets on
the models 705 and 706 (not shown).
E. Equipment Pack Service Panel (no user
serviceable parts): Spa support system consisting of
2-speed pumps, heater, and associated electrical
controls (not shown).
F. Drain Access: (Adjacent to the equipment service
panel) Spa drain faucets.
G. Digital/Fiber Optic Lighting: Lighting system
that displays multiple colored lights in pre-
programmed random, solid or alternating colors.
H. Manufacturer’s Identification Label: Contains
identification information for warranty service (serial
number, model number, etc.) and electrical
information (ampere rating and ampere requirements).
I. Auxiliary Control: Used to control jet pumps or
stereo functions.
J. «Full-Body Massage Seat ™»: Ultimate relaxation
seat.
K. Stereo/Speakers.
L. Sequencer Controls.
To Next Page
Loading...
Need help?
General
