Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic
waxing, use silicon wax.
Freezer: When refrigerator needs defrosting turn thermostat to “OFF” (“0”). Do not use sharp
instruments to scrap off ice/frost.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and
dry. Wash interior with baking soda solution (3 tablespoons to I liter of water) or warm
sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
The Finishing Touch: Replace all parts and return thermostat dial to desired setting.
HOW TO INSTALL
Install refrigerator in a convenient location
away from extreme heat and cold. Allow
sufficient clearance between the
refrigerator and sidewall so the door will
open without obstruction. Refrigerator is
not designed for recessed installation.
Select a space with strong level floor.
Not recommended for carpeting or other
soft / uneven surfaces.
Allow 5 inches of space between the
refrigerator’s side and the wall. In
addition, sufficient clearance (160°)
should be maintained to allow the door to
open properly and completely.
The appliance must be correctly
connected to the power supply.
Do not use an extension cord.
To Next Page
Loading...
Need help?
General
