HOW TO OPERATE
Starting Your New Refrigerator
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the interior with a
clean moist cloth.
2. Insert the power supply cord into the socket.
3. Turn the thermostat dial to “7”. Close the door and let the refrigerator operate for 20 minutes.
4. Reduce the thermostat to a mid-range setting “4” on the thermostat control.
Temperature Control
To control the internal temperature, adjust the
thermostat dial. “1” is the warmest setting. “7”
is the coldest. To turn the refrigerator off,
turn the temperature control knob to “0”. *
*Note:
Turning the temperature control to
“0” position stops the cooling cycle
but it does not shut off the power
supply to the refrigerator.
The Dial may be set any place on the scale. It does not have to be set exactly on a number. To
make ice cubes in the freezer compartment, adjust the thermostat to the coldest setting. (“7”)
Note: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to
operate properly if restarted too quickly.
HOW TO DEFROST
Defrost the freezer compartment when the ice / frost is approximately ¼” thick. Set the thermostat
The refrigerator is not designed to be installed in an outside area such
as a garage or a porch. Ambient temperatures of below 50°F or above
100.4°F will hinder the performance of the appliance.
To Next Page
Loading...
Need help?
General
