POWER CORD REPLACEMENT
If the refrigerator’s power cord is damaged, have it replaced by a qualified repair agent.
CARE AND MAINTENANCE
The refrigerator should be cleaned on a regular basis. (See: “HOW TO CLEAN”)
It is necessary to have an adequate ventilation space around the refrigerator in order to
attain proper performance, dissipation of heat, maintain efficiency, and low power
consumption. Clearance of minimum 5 inches should be maintained at the rear and sides of
the unit and 8 inches at the top of the unit.
To attain proper performance, be sure to plug the appliance into a properly grounded
115/60 Hz outlet.
Do not modify the power cord under any circumstance to allow the unit to be plugged
into a non-grounded outlet. To avoid heat damage to the power cord, please ensure that it
does not come in proximity or in direct contact with the compressor of the refrigerator.
Please avoid installing the refrigerator in a location where the appliance will come in
contact with water or moisture to minimize rusting of metal parts.
The refrigerator should not be installed near any heat source or in a location where it will
come in direct contact with the sunlight.
To Next Page
Loading...
Need help?
General
