BEFORE PUTTING INTO USE
Before connecting the appliance to the power supply, let the unit stand upright for 4 hours,
which will reduce the possibility of the cooling system malfunctioning due to improper
handling.
Clean your unit thoroughly before putting into use. (See “How to Clean”)
Use the parts diagram on page 4 to insure proper positioning of internal components.
TIPS FOR ENERGY SAVINGS
Keep the refrigerator and freezer doors closed as much as possible, particularly in warm /
humid conditions.
Maintain adequate ventilation around the back and sides of the unit.
Maintain a thermostat setting of “4” under normal use.
Allow warm food to cool to room temperature before placing in the refrigerator or freezer.
Excessive ice build up will increase energy consumption. Defrost the unit when ice / frost is
¼” thick.
To Next Page
Loading...
Need help?
General
