Your refrigerator is built with a reversible door. You have the choice of either opening it from the
left or the right side. In order to reserve the opening direction of your door, please follow these
simple instructions:
Remove all goods in your refrigerator. Tilt the refrigerator backwards. Secure the rear from
sliding. Tape the door to the cabinet to prevent from falling.
1. Remove the upper bracket cover and then the upper bracket.
2. Separate the door from the cabinet and remove the 2 or 3 hexagonal screws from base
bracket.
3. Remove the shorter adjustable leg, pivot and washer from base bracket, and remove the
longer adjustable lag from another cabinet side.
4. Install the pivot, washer and shorter adjustable leg to opposite base bracket side.
5. Attach the base bracket to the opposite side. Then attach the longer adjustable leg to the
other side.
6. Remove the two hole inserts from cabinet top and axle door insert from door top.
7. Re-attach door to the cabinet and the upper bracket, then fix the upper bracket cover.
8. Install the axle door insert and the hole inserts.
9. As the unit was tilted, wait half an hour before plugging it in.
HOW TO CLEAN
To Next Page
Loading...
Need help?
General
