Mahindra 10 Series User Manual

► The Main shift lever provides four speed positions. The Sub shift lever provides 3 ranges.
The Shuttle shift lever controls travel direction.
Use all three levers in different combinations to achieve 12 forward and 12 reverse speeds.
Machine motion must stop and the clutch pedal must be depressed before changing ranges. Gear may
b
e chan
g
ed while machine is in motion if clutch
p
edal is com
p
letel
y
de
p
ressed.
► TO AVOID PERSONAL INJURY:
○
When you leave the tractor,be sure to apply the parking brake and stop the engine
Do not operate gear levers without stopping the tractor & without using the clutch.
Important
gppyp
○
When
you
leave
the
tractor,be
sure
to
apply
the
parking
brake
and
stop
the
engine
○ In applying the brakes:
-The torque of wheel axle is extremely high while creep speed is being used.Be sure to step down
on the clutch pedal completely before applying the brakes,or they will not work.
-When starting to operate the tractor,be sure to release the parking brakes.Misuse of the brakes may
cause damage to the transmission and is therefore not acceptable to Mahindra for coverage under the
warranty.
► DIFF-LOCK PEDAL
In the case of wheel slippage use the diff-lock by pushing down
on the diff lock pedal.
To release it remove the foot from the pedal.
Tractor will be difficult to turn if the Diff-lock is engaged, ensure the lock is
disengaged before turning the steering wheel.
Danger
Do not use high engine RPM when engaging Diff lock If the diff lock does not
release after removing the foot from the diff lock pedal, brake with
the left and right brake alternatively, until it gets released.
43
Important

Mahindra 10 Series Specifications

General

Brand	Mahindra
Model	10 Series
Category	Tractor
Language	English