PTO GEAR SELECTION LEVER
Your tractor is equipped with a 1 Speed PTO to suit a range of applications and conditions.
POSITION
1
st
6110 Gear Cab 540
Always use the clutch when engaging or disengaging the PTO or changing PTO
speed. Let the PTO driven implement come to a complete stop before changing.
Important
Do not operate any implement at a higher speed than as specified.
When making adjustments to the implement stop the engine to avoid serious injury.
When leaving the tractor stop the engine and remove the key Set the parking brake
,
,
.
.
OPERATING THE HYDRAULICS.
The hydraulics are powered with an engine driven hydraulic pump and controlled with a position
control lever mounted beside the driver.
► Implements can be raised and lowered with the hydraulic position control lever and can be
stopped at any position by stopping the lever.
To ensure a consistent working depth the adjustable stop can be set to ensure that the implement
returns to the same depth every time.
45
To raise the implement: Pull the lever back
To lower the implement: Push the lever forward.
To Next Page
Loading...
Need help?
General