8-46
© Copyright Mahindra & Mahindra Ltd. 082014
2. Due to an obstacle or a sharp turn, you have deactivated the cruise mode
either by pressing the brake pedal or by switching OFF the cruise control
3. Vehicle comes out of the cruise mode
4. When the road condition is suitable to switch over back to cruise control
mode, press RESUME button once. The system activates the cruise control
mode to the previous cruising speed of 50 kmph
5. To resume the previous cruise set speed, the vehicle speed should be above
20 kmph
Override Function
This function enables the user to ramp up the cruising speed to overtake the vehicle
in front.
The cruising speed can be increased by using the accelerator pedal. The user has to
complete this action within 30 seconds, to maintain the cruise mode. If the user
exceeds the 30 second limit, cruise mode will be deactivated.
8.40 Micro Hybrid Stop/Start System (if equipped)
8.40.1 Overview of the Stop/Start System
8.40.2 How Does the Stop/Start System Work?
Let’s take a simple example of driving in traffic conditions within your city. Assume
that your vehicle has stopped at a traffic junction due to a red signal. The following
steps illustrate how the system functions.
• The vehicle has come to a halt at a traffic signal, is in the neutral gear and the
clutch pedal is released
• The ‘Stop/Start’ lamp in the cluster will blink indicating that the engine is going to
stop shortly. The engine will shut down automatically after a specific time period
FEATURES AND CONTROL
To Next Page
Loading...
Need help?
General
