11-2
© Copyright Mahindra and Mahindra Ltd.052016
leaks. If leaks are observed, contact an Authorized Mahindra
Dealer.
11.2 Starting the Engine
Make sure all vehicle occupants are properly seated in their seats
and have buckled their safety belts. For more information on seat,
headrest positioning, safety belts and their proper usage, refer to
the “Seat Belts” section in this manual.
Before cranking the engine
• Make sure the gear shift lever is in neutral
• Make sure the parking brake is engaged. Turn the key to IGN
position but do not turn the key to start
• Few warning lamps briefly illuminate. See “Warning Lamps in
the Instrument Cluster” section for more information
1. Shift the gear shift lever to neutral position.
2. Apply parking brake.
3. Turn the ignition ON.
4. Do not press the accelerator.
5. Turn the key momentarily to the START position to crank the
6. Once the engine starts, release the key; it will return to the
IGN position
Do not continue cranking after the engine has started.
This will lead to damage of the starter and other engine
components.
7. If the engine fails to start, attempt to restart after about 10
seconds
8. If the engine fails to start even after repeated attempts as
per the procedure given above, contact the nearest
Authorized Mahindra Dealer
To prevent damage to the starter, wait 10 seconds before
attempting to restart the engine.
If the vehicle battery has discharged, use booster cables, a
booster battery or a battery from another vehicle to start.
Jump-starting a vehicle can be dangerous if done improperly.
Refer to the “Jump-starting procedure” section in this manual.
If the engine still fails to start, contact an Authorized Mahindra
Dealer for assistance.
The idle speed is controlled automatically and it will decrease as the
engine warms up.
Observe the following when the engine is running;
STARTING AND DRIVING THE VEHICLE
To Next Page
Loading...
Need help?
General
