5-12
© Copyright Mahindra and Mahindra Ltd.052016
Adjust the seat as needed, sit up straight and well back in the seat.
To fasten your seat belt, pull the webbing out of the retractor and
insert the metal tab into the buckle. An audible “click” would be
heard when the tab locks into the buckle. Pull up on the shoulder
strap to tighten the lap belt across your hips. The seat belt
retractor will pull in any slack in the shoulder strap. A slow and easy
motion will allow the belt to extend and let you move your body
around freely.
Periodically check the seat belt as you ride to be sure it remains
snug and in position. If there is a sudden stop or impact, the belt will
lock into position. It will also lock (restrict) if you try to lean forward
too quickly.
If the driver or co-driver seat belt is not fastened when the
ignition is switched ON, the seat belt warning lamp illuminates.
Refer “Warning Lamps” in the “Features and Control” chapter
for further details.
5.7 Fastening the Seat Belt (2-Point Lap type)
This seat belt is applicable to the second row middle passenger
seat. Insert the tongue into the buckle until it snaps. Position the lap
belt on the hips as low as possible.
SEATS AND SEAT BELTS
To Next Page
Loading...
Need help?
General
