Makita 2030N User Manual

0 Lock the drum at the position shown in Fig. 17 and loosen the hex bolts with the
When removina the blade from the Auto-Planer, lock the drum at the position shown
socket wrench. Remove the hex bolts and the drum cover.
0 Insert the blade between the drum and
the blade holder.
Set the blade so that
it will protrude by 2 mm (5/64") to
3 mm (1/8") from the drum. The holes
of the blade should be aligned with the
holes of the drum.
I
in Fig. 18 and push the blade
the screwdriver.
Blade Blade holder
2mm - 3mm
out with
Fig. 19
.When removing the blade from the
Jointer, release the drum lock and turn
the knob to the position
at which the
blade can be pushed out with the screw-
driver.
Fig. 20
2. Installing blades
0 Lock the drum at the position shown in Fig. 18.
14

Makita 2030N Specifications

General

Brand	Makita
Model	2030N
Category	Planer
Language	English