Makita 2704N User Manual

18
6. Insert the new carbon brushes and secure the
brush holder caps.
7. Attach the bottom plate with screws and carefully
lay the tool on its bottom. Store the rip fence if removed.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Steel & Carbide-tipped saw blades
• Sub table (L)
• Sub table (back)
• Rip fence
• Miter gauge
• Offset wrench 13-22
• Wrench 19
• Hex wrench 5
• Joint (for connecting to dust collector)
• Table stand set
Refer to the instruction manual for table saw stand
that is provided with the table saw stand as an optional
accessory.
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.

Makita 2704N Specifications

General

Idle speed	5200 RPM
Uncertainty K	3 dB
Sound power level	107 dB
Angle setting range	-0.5 - 50 °
Cutting depth (45º)	64 mm
Cutting depth (90º)	93 mm
Sound pressure level	94 dB
Rotational speed (min)	4800 RPM
Wheels	Yes
Product color	Blue, Grey
Placement supported	Freestanding
Input power	1650 W
Saw blade included	-

Weight and Dimensions

Width	715 mm
Height	483 mm
Weight	35200 g
Cord length	2.5 m
Table depth	665 mm
Table width	753 mm
Bore diameter	30 mm
Blade diameter	260 mm