2 ENGLISH
SPECIFICATIONS
Model: 2704N
Arbor hole
(Country specic)
30 mm / 25.4 mm
Blade diameter 260 mm
Max. cutting capacities bevel 0° 93 mm
bevel 45° 64 mm
No load speed 5,200 min
-1
Table size (L x W) with sub tables (R) and (back) 1,045 mm x 1,066 mm (tables extended)
665 mm x 753 mm (tables stored)
with sub table (R)
without sub table (back)
567 mm x 1,066 mm (table extended)
567 mm x 753 mm (table stored)
Dimensions (L x W x H) with
table(s) not extended
with sub tables (R) and (back) 715 mm x 753 mm x 483mm
with sub table (R)
without sub table (back)
665 mm x 753 mm x 483 mm
Net weight 35.2 kg - 37.0 kg
Safety class
/II
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Do not place hand or ngers close to the
blade.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting in wood.
Straight cutting, bevel cutting, and miter cutting are
available with this tool. This tool is not designed for non-
through cutting.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Sound pressure level (L
pA
) : 94 dB(A)
Sound power level (L
WA
) : 107 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
