Makita 3901 User Manual

9
OPERATION
How to make joints
To make joints, proceed as follows:
1. Fit the two workpieces together as they will appear in the finished joint
position.
Corner Joint (Fig. A)
T-Butt Joint (Fig. B)
Miter Joint (Fig. C)
Frame Joint (Fig. D)
Edge-To-Edge Joint (Fig. E)
2. Mark the center of the intended biscuit slots on the workpiece using a
pencil.
NOTE:
• The center of slots should be at least 50 mm from the outer edge of
the workpieces.
• Allow 100 mm - 150 mm between slots in multiple biscuit application.
Fig. A
004584
Fig. B
004585
Fig. C
004586
Fig. D
004587

Makita 3901 Specifications

General

Brand	Makita
Model	3901
Category	Power Tool
Language	English