Makita DCS230T User Manual

19
Technical data
1) Figures derived in equal part from idle, full-load, and top-speed operation.
2) Figures derived in equal part from full-load and racing speed.
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The declared vibration emission value has been measured in accordance with the standard test method and may be
used for comparing one tool with another.
• The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power tool can differ from the declared emission value depending on
the ways in which the tool is used.
• Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
Stroke volume cm
3
22.2
Bore mm 33
Stroke mm 26
Max. power at speed kW/min
-1
0.74/8,000
Max. torque at speed Nm/min
-1
0.97/6,500
Idling speed / max. engine speed with bar and chain min
-1
3,000/11,500 (DCS230T),
3,000/10,500 (DCS231T),
3,000/10,000 (DCS232T)
Coupling speed min
-1
4,500
Sound pressure level at the workplace L
pA av
per ISO
22868
1)
dB (A) 95.0
Sound power level L
WA, Fl+Ra
per ISO 22868
2)
dB (A) 105.8
Uncertainty for noise dB (A) K: 2.5
Vibration acceleration a
h,w av
per ISO 22867
1)
- Tubular handle m/s
2
6.0
- Rear handle m/s
2
5.0
Uncertainty for vibration m/s
2
K: 2.0
Carburetor (diaphragm carburetor) Type Walbo WYL
Ignition system Type electronic
Spark plug Type NGK CMR 6A
Electrode gap mm 0.6 - 0.7
Fuel consumption at max. load per ISO 7293 kg/h 0.41
Specific consumption at max. load per ISO 7293 g/kWh 561
Fuel tank capacity cm
3
200
Chain oil tank capacity cm
3
190
Mix ratio (fuel/two-stroke oil) 25:1
Chain brake Actuation manually or by kickback
Chain speed (at racing speed) m/s 20.4 (91PX, 91VG) 18.0 (25AP)
Sprocket pitch inch 3/8 (91PX, 91VG) 1/4 (25AP)
Number of teeth Z 6 (91PX, 91VG) 8 (25AP)
Pitch / Driving element strength inch
3/8 /0.050 (91PX, 91VG)
1/4 /0.050 (25AP)
Guide bar, length of a cut cm 25
Weight (fuel tank empty, without chain and guide bar) kg 2.5

Makita DCS230T Specifications

General

Brand	Makita
Model	DCS230T
Category	Chainsaw
Language	English