12 ENGLISH
Switch control on display panel and screen components
Buttons and descriptions on start screen
Fig.9
1. LED indicator A
Lights up in green, red, blue and yellow colors.
2. Display screen
Displays and navigates you to the settings menu.
3. Up arrow button
Edit tool settings using four buttons on the panel
accordingly.
4. Down arrow button
Edit tool settings using four buttons on the panel
accordingly.
5. Left arrow button
Edit tool settings using four buttons on the panel
accordingly.
6. Right arrow button
Edit tool settings using four buttons on the panel
accordingly.
7. Information window
Upper row: Fastening torque set in the previous
operation
Lower row: Rotation angle set in the previous operation
8. Mode indicator
Displays the mode currently selected.
* Only “manual mode” is available for this tool.
9. Data communication status indicator
Status symbols Indicate data communication status as
follows:
Status symbol Communication status
Data communication not
established
* This symbol always
appears on the screen
during fastening
operation.
USB data communication
established
10. Job indicator
Displays the job number currently selected.
Up to 8 jobs can be stored in the tool memory using the
application software designed for this tool.
Job data includes settings information and operation
logs such as fastening torque and rotation speed.
NOTE: When the number zero appears on the
screen, no job data is saved in the tool. Create a job
using the application software designed for this tool.
11. Page number currently displayed on the
screen / Total page numbers
12. Data saving progress indicator
A status symbol (
) appears in the display screen
while the tool settings and operation logs are being
saved in the tool memory.
NOTICE: Do not remove the battery cartridge
-
tion logs are being saved in the tool memory.
To Next Page
Loading...
Need help?
General
