Makita DUR182L User Manual

10
Indication lamps
1
2
013836
When the protection system works during the operation,
the lamps light up.
Refer to the following table for the status and action to
be taken for the indication lamp.
Status
Blinking
Lighting Up
Battery power has been
nearly used up.
Battery protector is
shutting off the power -
battery power has been
used up.
Action to be taken
Replace the battery with fully charged one.
Replace the battery with fully charged one.
Rest and cool down the equipment
for a while.
Overheat protector is shutting
off the power - overheating.
Power
indicator
Battery
indicator
Blinking
013900
Nylon cutting head
NOTICE:
• Do not attempt to bump feed the head while the
tool is operating at a high RPM. Bump feeding at a
high RPM may cause damage to the nylon cutting
head.
• The bump feed will not operate properly if the
head is not rotating.
1
013811
The nylon cutting head is a dual grass trimmer head
provided with a bump & feed mechanism.
To cause the nylon cord to feed out, the cutting head should
be bumped against the ground while rotating at a low RPM.
NOTE:
If the nylon cord does not feed out while bumping the
head, rewind/replace the nylon cord by following the
procedures described under “Maintenance.”
ASSEMBLY
WARNING:
• Always be sure that the tool is switched off
and battery cartridge is removed before
carrying out any work on the tool. Failure to
switch off and remove the battery cartridge may
result in serious personal injury from accidental
start-up.
• Never start the tool unless it is completely
assembled. Operation of the tool in a partially
assembled state may result in serious personal
injury from accidental start-up.
1.
Most effective
cutting area
1. Battery indicator
2. Power indicator

Makita DUR182L Specifications

General

Power source	Battery
Charging time	0.366 h
Operating time	60 min
Battery voltage	18 V
Battery capacity	3 Ah
Cordless	Yes
Product color	Black, Blue, White
Uncertainty K	1.5 m/s²
Rotational speed	6000 RPM
Vibration emission	2.5 m/s²
Sound pressure level	79 dB
Cutting diameter (max)	300 mm
Sound power level guaranteed	90 dB
Sound power level uncertainty	0.7 dB

Weight and Dimensions

Depth	253 mm
Width	287 mm
Length	1843 mm
Weight	4100 g