Makita DUR182L User Manual

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DUR142L DUR182L DUR183L
Type of pipe Integrated pipe Splittable pipe
No load speed 3,500 - 6,000 min
-1
Overall length with nylon cutting head 1,843 mm
Split length - 982 mm
Cutting diameter with nylon cutting head 300 mm
Net weight 3.8 kg 3.9 kg 4.1 kg
Rated voltage D.C. 14.4 V D.C. 18 V
Standard battery cartridge and charger
Always keep the combinations of battery/charger on the right columns.
BL1415N, BL1430,
BL1440 / DC18RC
BL1815N, BL1820, BL1830,
BL1840, BL1850 / DC18RC
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise Sound pressure level
Model L
PA
(dB (A)) Uncertainty K (dB (A))
Applicable standard or
directive
DUR142L 78 1.0
DUR182L / DUR183L 79 0.7
2000/14/EC
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear ear
protection.
Vibration Front grip Rear grip
Model a
h
(m/s
2
) Uncertainty K (m/s
2
) a
h
(m/s
2
) Uncertainty K (m/s
2
)
Applicable standard
or directive
DUR142L 2.5 1.5 2.5 1.5
DUR182L / DUR183L 2.5 1.5 2.5 1.5
EN786
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
END020-3
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Take particular care and attention.
･ Read instruction manual.
･ Danger; be aware of thrown objects.
･ The distance between the tool and
bystanders must be at least 15 m.
･ Keep bystanders away.
･ Keep distance at least 15 m.
･ Wear a helmet, goggles and ear
protection.
･ Wear protective gloves.
･ Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
15m(50FT)

Makita DUR182L Specifications

General

Power source	Battery
Charging time	0.366 h
Operating time	60 min
Battery voltage	18 V
Battery capacity	3 Ah
Cordless	Yes
Product color	Black, Blue, White
Uncertainty K	1.5 m/s²
Rotational speed	6000 RPM
Vibration emission	2.5 m/s²
Sound pressure level	79 dB
Cutting diameter (max)	300 mm
Sound power level guaranteed	90 dB
Sound power level uncertainty	0.7 dB

Weight and Dimensions

Depth	253 mm
Width	287 mm
Length	1843 mm
Weight	4100 g