Makita DUR182L User Manual

8
FUNCTIONAL DESCRIPTION
WARNING:
• Always be sure that the tool is switched off
and battery cartridge is removed before
adjusting or checking the functions on the tool.
Failure to switch off and remove the battery
cartridge may result in serious personal injury from
accidental start-up.
Installing or removing battery cartridge
1
2
3
013921
CAUTION:
• Always switch off the tool before installing or
removing of the battery cartridge.
• Hold the tool and the battery cartridge firmly
when installing or removing battery cartridge.
Failure to hold the tool and the battery cartridge
firmly may cause them to slip off your hands and
result in damage to the tool and battery cartridge
and a personal injury.
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
• Always install the battery cartridge fully until the
red indicator cannot be seen. If not, it may
accidentally fall out of the tool, causing injury to
you or someone around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being
inserted correctly.
Power switch action
WARNING:
• Before inserting the battery cartridge in the
tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF" position when released. Do not pull the
switch trigger hard without turning the lock-off
lever. This can cause switch breakage.
Operating a tool with a switch that does not
actuate properly can lead to loss of control and
serious personal injury.
1
2
013834
Push the power button on the housing so that the tool is
powered on and power indicator lights.
1
2
014158
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided.
To start the tool, turn the lock-off lever and then pull the
switch trigger. Release the switch trigger to stop.
NOTE:
• After the power button is pushed and the tool is
left one minute without any operations, the tool is
automatically powered off.
Reversing Switch for Debris Removal
WARNING:
• Always be sure that the tool is switched off
and battery cartridge is removed before
removing weeds or debris entangled in the tool
that could not be removed when operated in
the reverse mode. Failure to switch off and
remove the battery cartridge may result in serious
personal injury from accidental start-up.
1. Lock-off lever
2. Switch trigger
1. Power indicator
2. Power button
1. Red indicator
2. Button
3. Battery cartridge

Makita DUR182L Specifications

General

Power source	Battery
Charging time	0.366 h
Operating time	60 min
Battery voltage	18 V
Battery capacity	3 Ah
Cordless	Yes
Product color	Black, Blue, White
Uncertainty K	1.5 m/s²
Rotational speed	6000 RPM
Vibration emission	2.5 m/s²
Sound pressure level	79 dB
Cutting diameter (max)	300 mm
Sound power level guaranteed	90 dB
Sound power level uncertainty	0.7 dB

Weight and Dimensions

Depth	253 mm
Width	287 mm
Length	1843 mm
Weight	4100 g