Makita HS6101K User Manual

6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model HS6100 HS6101 HS7100 HS7101
Blade diameter 165 mm 190 mm
Max. cutting depth at 0° 54.5 mm 67 mm
at 45° 39.5 mm 48.5 mm
at 50° 35.5 mm 43.5 mm
No load speed (min
-1
) 5,500
Overall length 297 mm 310 mm
Net weight 3.5 kg 3.5 kg 3.7 kg 3.8 kg
Safety class
/II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
woodwhileinrmcontactwiththeworkpiece.With
appropriatesawblades,aluminumcanalsobesawed.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause volt-
ageuctuations.Theoperationofthisdeviceunder
unfavorablemainsconditionscanhaveadverseeffects
to the operation of other equipment. With a mains
impedanceequalorlessthan0.32Ohmsitcanbepre-
sumedthattherewillbenonegativeeffects.Themains
socketusedforthisdevicemustbeprotectedwitha
fuseorprotectivecircuitbreakerhavingslowtripping
characteristics.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model HS6100,HS6101
Sound pressure level (L
pA
) : 98 dB (A)
Sound power level (L
WA
) : 109 dB (A)
Uncertainty (K) : 3 dB (A)
Model HS7100,HS7101
Sound pressure level (L
pA
) : 97 dB (A)
Sound power level (L
WA
) : 108 dB (A)
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
beenmeasuredinaccordancewithastandardtest
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN62841:
Model HS6100,HS6101
Work mode : cutting wood
Vibrationemission(a
h,W
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting metal
Vibrationemission(a
h,M
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model HS7100,HS7101
Work mode : cutting wood
Vibrationemission(a
h,W
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting metal
Vibrationemission(a
h,M
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.

Makita HS6101K Specifications

General

Brand	Makita
Model	HS6101K
Category	Saw
Language	English