Safety
cover
When lowering the handle, the safety cover
rises
by
means of the guide arm. The cover
returns to
its
original position when the
cut
is
completed and the handle
is
raised.
NEVER DEFEAT
OR
REMOVE THE
SAFETY COVER. In the interest of your
personal safety, always maintain the safety
cover in good condition. Any irregular
operation of the safety cover should
be corrected immediately.
NEVER
USE
THE TOOL WITH A FAULTY SAFETY
COVER. If the see-through safety cover
becomes dirty, or sawdust adheres to
it
in such
a
way that the blade and/or workpiece
is
no longer easily visible, unplug the saw and clean the cover carefully with
a
damp cloth.
Do not use solvents or any petroleum-based cleaners on the plastic cover.
Dust
bag
The use of the dust bag makes cutting
operations clean and dust collection easy.
To attach the dust bag, fit
it
onto the dust
nozzle
of
the blade case.
When the dust bas
is
about half full, re-
I
1
I
Fastener
I
7
To Next Page
Loading...
Need help?
General
