Man D 2842 LE 416 User Manual

Commissioning and operation
29
The selection cursor can be moved using the Move function (+– keys
TEST
RESET
).
The Enter function (PRG key
Prg
) is used to accept each marked language and high-
light it in black. The selection cursor then returns to the currently set unit for tempera-
tures (e.g. °F):
Display in degrees Celsius Display in degrees Fahrenheit
(°C) > (°F) <
Selection is again using the Move function (+– keys
TEST
RESET
) followed by accept-
ance using the Enter function (PRG key
Prg
). The selection is highlighted in black and
the selection cursor jumps to the currently set unit for pressures (e.g. bar).
Display in BAR Display in PSI
> (BAR) < (PSI)
After selection and acceptance, all the settings for language and unit have been con-
cluded and highlighted accordingly in black. The selection cursor jumps to the second
last line to the item “exit”:
>exit< back set-time service
If this is confirmed using the Enter function (PRG key
Prg
) or you cancel at this point
using the Escape function (Menu key
ALARMS
Men
), you return with the currently marked mode
to the normal display function. In the event of an input error, you can use the function
“back” to repeat the input. The selection cursor jumps back to the initial position (lan-
guage selection).
Setting the time
First, the selection cursor must be placed in the second last line. To do so, the current
language and unit settings are confirmed each time with the key
Prg
. The selection
cursor can now be positioned using the +– keys
TEST
RESET
to “set-time”.
exit back > set-time < service

Man D 2842 LE 416 Specifications

General

Brand	Man
Model	D 2842 LE 416
Category	Engine
Language	English