Maintenance and care
101
Electric oil drain pump (option) for engine and
gearbox oil
Pump off engine oil
Unscrew the sealing cap of the oil drainage hose
(1). Connect the suction line (2) of the oil drainage
pump to the engine oil drainage hose (1).
With the installation hot after running, press the
“OIL OUT" button of the oil drainage pump and
pump all the used oil via the oil drainage hose(1)
into a container of adequate capacity.
Note:
Change the oil filter elements every time
the engine oil is changed.
Fill the engine with engine oil
Fill the engine with engine oil via the discharge
hose (1), by pressing the “OIL IN" button.
Caution:
Do not add so much engine oil that the oil
level rises above the max. marking on the
dipstick. Overfilling will result in damage
to the engine.
Disconnect the suction line (2) of the oil drainage
pump from the engine oil drainage hose (1). Screw
on the sealing cap of the oil drainage hose (1).
For oil filling quantity see “technical data", from
page 116.
1
2
3
To Next Page
Loading...
Need help?
General
