Commissioning and operation
78
Description of buttons
Button Function see
Request command “Activate control console", see page 79
Accept command
“Change control console", see page 80
Engine warm up “Engine Warm Up", see page 81
Acknowledge alarm “Acknowledge alarm", see page 86
Adjust brightness of LEDs “Adjust brightness" see page 85
Automatic synchronisation of the en
gine speeds for twin engine layouts
“Synchronise engine speed", see page 81
Switch on and off the “Slip & Grip" ope
rating function
Switch “Slip & Grip on and off", see page 85
Switch on and off the “Trolling" opera
ting function
Switch “Trolling on and off", see page 84
Description of LEDs
LED Function
Separate display for port and starboard
engine
Flashes slowly:
Command requested,
Handover not possible
Flashes rapidly:
Command requested,
Handover possible
Continuously lit:
Command active
yes
Continuously lit:
Engine speed adjustment possible
Gearbox “Neutral"
yes
Flashes:
Speed synchronisation is in stand-by-
mode
Continuously lit:
Speed synchronisation active
no
Continuously lit:
Trolling active
no
Continuously lit:
Slip & Grip active
no
Continuously lit:
Alarm
yes
To Next Page
Loading...
Need help?
General
