EasyManuals Logo
Home>Manitou>Front End Loaders>A Series

Manitou A Series User Manual

Manitou A Series
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
4 - 3
INTRODUCTION
- A wide range of attachments studied and perfectly adapted to your lift truck is available and guaranteed by the manufacturer.
- The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart should be
kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions contained on
this notice.
We would remind users that the MT 932 Série A, are lift trucks essentially intended for handling. Occasional use with the
buckets CBC 800 and CBR 900 is authorised, but under no circumstances is intensive use for difficult applications (quarry,
waste, cereals, agriculture, etc) permissible.
In addition, use of the lift truck with the buckets CBC 800 and CBR 900 should be with the jib completely retracted, in order to
reduce the constraints on the jib head.
Use other buckets CBA, CBC, CBR, CB, CBG and manure forks FF, FFGR is forbidden.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
It is COMPULSORY for all ATTACHMENTS WITH SUSPENDED LOAD (Hoist, crane jib, crane jib with winch, hook, etc.) to be
used with a fork lift fitted with AUTOMATIC HYDRAULIC MOVEMENT CUT-OFF.
Only attachments approved by the manufacturer are to be used on our lift trucks (See chapter : TECHNICAL SPECIFICATIONS
OF ATTACHMENTS in paragraph : 4 - ADAPTABLE ATTACHMENTS IN OPTION ON THE RANGE). The manufacturer's liability
will be denied in case of modification or of attachment adaptation carried out without his knowing it.
Depending on their size, certain attachments may, when the jib is lowered and retracted, come into contact with the front
tyres and cause damage to them, if reverse tilt is activated in the forward tilt direction. TO REMOVE THIS RISK, EXTEND THE
TELESCOPE TO A SUFFICIENT EXTENT FOR THE PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT
IS NOT POSSIBLE.
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s weight and centre of gravity. In
the event of the attachment having less capacity than the lift truck, never exceed this limit.

Other manuals for Manitou A Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou A Series and is the answer not in the manual?

Manitou A Series Specifications

General IconGeneral
BrandManitou
ModelA Series
CategoryFront End Loaders
LanguageEnglish

Related product manuals