Manitowoc Grove RT9130E-2 User Manual

5-11
RT9130E-2 OPERATOR MANUAL MAINTENANCE AND LUBRICATION
5
Published 3-1-2018, Control # 559-03
GROVE
Item
Lube Point
Description
Figure
No.
Approved
Lubricant
Lube
Capacity
Lube Interval Application
Axles
11 Differentials Figure 5-2
GL-5
Extended
Service Interval
Gear Lubricant
6829012964
130.2 pints
(62 l)
• Check level every
500 hours or 3
months
• Drain and fill every
4000 hours or 2
years
Fill to bottom of hole
in housing on the
steer cylinder side
NOTE: Lube level close enough to the hole to be seen or touched is not sufficient. It must be level with the hole.
When checking lube level, also check and clean housing breathers.
CAUTION: Use of non-approved lubricant may damage components and/or invalidate published lubricant intervals.
CAUTION: If the makeup amount is substantially more than 0.23 liter (0.5 pint), check for leaks.
12
Planetary Hubs
and Wheel
Bearings
Figure 5-2
GL-5
Extended
Service Interval
Gear Lubricant
6829012964
14.4 pints
(7.0 l)
• Check level every
500 hours or 3
months
• Drain and fill every
4000 hours or 2
years
Fill to the bottom of
the level hole in the
housing with the fill
plug and the oil level
mark horizontal.
CAUTION: Use of non-approved lubricant may damage components and/or invalidate published lubricant intervals.

Manitowoc Grove RT9130E-2 Specifications

General

Brand	Manitowoc
Model	Grove RT9130E-2
Category	Construction Equipment
Language	English