OPERATING CONTROLS AND PROCEDURES 5540F/YB5515 OPERATOR’S MANUAL
3-2 Published 10-21-2011, Control # 055-03
CONTROLS, SWITCHES, AND GAUGES
Cab Controls
Brake Pedal
See Figure 3-1 for the following procedure.
Pressing down on the brake pedal applies the service
brakes, which slows and stops the crane travel movement.
Accelerator Pedal
See Figure 3-1 for the following procedure.
Controls the travel speed and hydraulic work function
speeds of the crane. Pressing down on the accelerator pedal
increases the engine speed. The pedal is spring-loaded to
return to idle speed.
Travel Select Lever
See Figure 3-1 for the following procedure.
Selects the forward and reverse travel of the crane.
For more information see Traveling with the Crane in this
section.
Transmission Shift Lever
See Figure 3-1 for the following procedure.
The transmission shift lever, manually shifts the transmission
to any one of four gear ratios.
For more information see Shifting Gears (Travel Speed) in
this section.
Transmission Shift Lever
Accelerator Pedal
Brake Pedal
Travel Select Control
Boom and Outrigger
Controls
FIGURE 3-1
p1615
To Next Page
Loading...
Need help?
General
