134 Part Number: 000015431 Rev01 5/19
UPGRADING FIRMWARE WITH A FLASH DRIVE
Important
The flash drive must be formatted before using. All
files and software on the flash drive are removed
during the formatting process.
1. Drag and drop the files from website or email onto a
flash drive, insuring they are not in a folder.
2. Ensure that the ice machine’s power is on.
3. Navigate to USB - Menu / Service / USB.
4. Insert the flash drive into the USB port on the ice
machine control board. Do not remove flash drive
until update is complete).
NOTE: See “Electronic Control Board” on page 200 for
USB location.
5. Select Upgrade firmware and remove USB drive when
the transfer is complete.
To Next Page
Loading...
Need help?
General