To Next Page

To Previous Page

Part Number: 000015431 Rev01 5/19 43

Step 8 Use 1/2 of the cleaner/water mixture to clean

all components. The cleaner solution will foam when it

contacts lime scale and mineral deposits; once the foaming

stops use a soft-bristle nylon brush, sponge or cloth (NOT

a wire brush) to carefully clean the parts. Soak parts for 5

minutes (15 - 20 minutes for heavily scaled parts). Rinse all

components with clean water.

Step 9 While components are soaking, use 1/2 of the

cleaner/water solution to clean all food zone surfaces of

the ice machine and bin (or dispenser). Use a nylon brush

or cloth to thoroughly clean the following ice machine

areas:

• Side walls

• Base (area above water trough)

• Evaporator plastic parts - including top, bottom, and

sides

• Bin or dispenser

Rinse all areas thoroughly with clean water.

SANITIZING PROCEDURE

Step 10 Mix a solution of sanitizer and lukewarm water.

Solution

Type

Water Mixed With

Sanitizer 3 gal. (12 L) 2 oz (60 ml) sanitizer

Step 11 Use 1/2 of the sanitizer/water solution to

sanitize all removed components. Use a spray bottle to

liberally apply the solution to all surfaces of the removed

parts or soak the removed parts in the sanitizer/water

solution. Do not rinse parts after sanitizing.

Manitowoc IYF0900C Technician's Handbook

Other manuals for Manitowoc IYF0900C