Installation Instructions Section 2
2-10
Part Number 000001590
Installation Check List
F Is the Ice Machine level?
F Has all of the internal packing been
removed?
F Have all of the electrical and water
connections been made?
F Has the supply voltage been tested and
checked against the rating on the nameplate?
F Is there proper clearance around the ice
machine for air circulation?
F Is the ice machine grounded and polarity
correct?
F Has the ice machine been installed where
ambient temperatures will remain in the
range of 50° - 110°F (10° - 43.3°C)?
F Has the ice machine been installed where the
incoming water temperature will remain in the
range of 35° - 90°F (1.6° - 32.2°C)?
F Is the ice machine drain line routed to an
open site drain?
F Are all electrical leads free from contact with
refrigeration lines and moving equipment?
F Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?
F Has the OWNER WARRANTY
REGISTRATION CARD been completed?
F Has the ice machine and bin been sanitized?
F When installed is the drain pump functioning
correctly energizes, de-energizes and safety
switch stops the ice machine?
F GFCI Required - Is it a breaker type and not a
receptacle type?
F Is the ice machine plugged into a properly
grounded, polarized receptacle?
F Have the water and drain connections been
examined for leaks?
NOTE: If air temperature is less than 60°F (15.5°C), water temperature must be equal to or greater than 50°F (10°C).
To Next Page
Loading...
Need help?
General
