Part Number 000014797 Rev02 05/18 67
Clean
Pressing the Clean button for 3 seconds will start a clean
cycle. After the clean cycle is complete, the ice machine
will automatically start an ice making cycle.
• Pressing the Clean button again within 45 seconds of
the clean cycle starting will abort the clean cycle.
• Pressing the On/Off button after 45 seconds will pause
the Clean cycle. The On/Off light will flash on/off to
indicate pause mode. Pressing the On/Off button
again will continue the Clean cycle from the point of
interruption.
• Pressing the control board test button anytime during
the clean cycle will cancel the clean cycle.
• Opening the damper for 30 seconds during the clean
cycle will start and automatic shutdown sequence.
Bin Full
The Bin Full light energizes when the bin is full or is de-
energized if the bin is not full.
Service
The service light indicates the machine needs attention.
• Refer to safety limits if this light is energized.