Marshall Amplification CV620-TBI User Manual

CV620-TBI/TWI User Manual
www.marshall-usa.com20 21
CHAPTER 5: NETWORK FUNCTIONS SETTINGS
5.1 Connecting Camera to Network
5.1.1 Remote Control
Two common connection methods are show below:
1. Connecting via switch or router
2. To connect directly through network cable, the IP address of the computer should be
changed so that it is on the same network segment as the camera.
E.g: The factory-preset default IP address of the camera is 192.168.100.150. The computer IP
address must be set with the same network segment, such as 192.168.100.101, so that the
computer can be connected correctly with the camera
Network Cable
Camera
Camera Computer
Computer
Network CableNetwork Cable
• Change network settings
5.1.2 Using the Browser to View the Images
• Open the browser, and enter the IP address of the camera
in the address bar
E.g.: http://192.168.100.150 (default IP address)
• Enter administrator’s account and password
Note: For the first-time login, refer to 5.2.9 System Settings -
User to change the default password
Network Camera
• Account: admin
• Password: 9999 (Default)
5.1.3 Using Marshall VMS Software
to View the Images
• Open MARSHALL VMS software (Please
download from the Marshall official website)
• Search Camera: Press [automatically search for
the device] button to locate the Camera
• Click camera in the list and start operation after
connecting to network
Note: When using automatic search, the camera and computer must be in the same network
segment, e.g.: 192.168.4.X
5.1.4 Using RTSP Player to
View the Images
RTSP connections can be made using free
software, e.g.: VLC, Quick Time, PotPlayer, etc.
RTSP connection address formats are as follows:
• RTSP main stream (h264)=>rtsp://VC IP
Address:8557/h264
• RTSP second stream (h264) =>rtsp://VC IP
Address:8556/h264
• RTSP second stream (MJPEG) or single stream
in MJPEG=>rtsp://VC IP Address:8555/mjpeg
If password authentication is enabled, the RTSP connection address is as follows:
• rtsp://Username:Password@VC IP address:port/hevc
• rtsp://Username:Password@VC IP address:port/mjpeg
Note: To enable password authentication function, please refer to 5.2.5 Setting - Streaming
Example: Open the VLC software, click [Open Network Streaming], and enter the URL:
r tsp: //192.168.10 0.150:85 57/ h26 4
Switch or router

Marshall Amplification CV620-TBI Specifications

General

Brand	Marshall Amplification
Model	CV620-TBI
Category	Security Camera
Language	English