AVAILABLE ACCESSORIES
WARNING: Use only grinding and
cut-off discs that are recommended for
this cordless angle grinder. Follow the
instructions that accompany the
grinding and cut-off discs. The use of
improper discs may result in injury to
the operator or damage to the angle
grinder.
Before using any accessory, carefully read
the instructions or the owner’s manual for
the accessory.
Grinding discs
Cut-off discs
WARNING: If any part is missing or
damaged, do not install a battery in the
tool until the missing or damaged part is
replaced.
CONTENTS
Carefully unpack the cordless angle
grinder. Compare the contents against the
“ANGLE GRINDER COMPONENTS” chart
below.
NOTE: See illustration of the cordless
angle grinder and components on
Page 13.
Battery packs and chargers must be
purchased separately.
This angle grinder has been designed to
be powered by one of the following battery
packs:
● 18 V Nickel-Cadmium #054-3102-2
● 18 V Lithium-ion #054-3100-6
WARNING: Only use the battery
packs listed above to power this tool.
Using any other battery pack could
cause serious injury or damage the
tool.
Both battery packs can be charged using
one of the following chargers:
● 14.4 V / 18 V LED Diagnostic Battery
Charger #054-3103-0
● 14.4 V / 18 V LCD Diagnostic Battery
Charger with LCD Status Display
#054-3101-4
WARNING: Only use the battery
chargers listed above to charge the
battery packs listed above. Charging
any other batteries may damage the
charger and possibly cause serious
injury.
WARNING: Follow all safety rules
and warnings included with the battery
pack and charger purchased for use
with this tool. Failure to follow those
safety rules and warnings may result in
serious injury or damage to the charger
and battery pack.
Never dispose of defective batteries with
your household waste. Always recycle
defective batteries in accordance with your
local municipal policies.
To Next Page
Loading...
Need help?
General
