WARNING: Have you read “GENERAL SAFETY WARNINGS”, “POWER
TOOL SAFETY”, “SPECIFIC SAFETY RULES”, BATTERY AND CHARGER
SAFETY” and “SYMBOLS” on pages 3, 4, 5, 6, 7, 8, 9 &10 of this Manual? If not,
please do it now before you operate this angle grinder. Your safety depends on
it!
Every time you use the angle grinder you should verify the following:
1. Grinding disc is correct for the type of material being ground
2. Grinding disc is in good condition and securely tightened onto the spindle
3. Proper eye and hearing and breathing protection are being worn.
Failure to adhere to these safety rules can greatly increase the chances of
injury.
WARNING: Never attach a wood
cutting or carving blade of any type to
this angle grinder. It is designed for
grinding metal only. Use for any other
purpose is not recommended and
creates a hazard which will result in
serious injury.
WARNING: Never cover air vents.
They must always be open for proper
motor cooling.
ON/OFF SWITCH
The ON/OFF switch performs three
separate functions:
Lock-off
ON/OFF
Lock-on
To Next Page
Loading...
Need help?
General
