24
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Keypad This option is for a keypad test. N/A
Touch Calibration This option allows for a touch calibration of the
console. Follow the cross mark and touch the
screen to catch. After 5 positions are tested, touch
the center of the screen to exit this test.
N/A
KeypadType
Default: No Quick Start
This option sets the type of keypad for the
treadmill. It should always be set for NO Quick
Start on treadmills.
Quick Start or No Quick Start
Radio Test This option will test the radio signal for function. N/A
SERVICE MODE
Test
7.3 SERVICE MODE - TAB 2
CHAPTER 7: SERVICE MODE