866.4.Maxtec www.maxtec.com2
1.3 Symbol Guide
The following symbols and safety labels are found on the MAXBlend2:
SYMBOL GUIDE
The following symbols and safety labels are found on the MAXBlend2 and/or labeling:
POWER SUPPLY SYMBOL GUIDE
The following symbols and safety labels are found on the MAXBlend2 power supply:
EC REP
Authorized Representative
in the European Community
IPX2
Ingress Protection
Rating
LPM
Liters Per
Minute
REF
Catalog Number
Manufacturer
Attention, consult accompanying
documents
Two means of patient
protection (double insulated)
Power Supply Meets CEC Tier
3 and EU Phase 2 Standards
Consult Instructions For Use
Complies with Directive 2011/65/EU
RoHS
Calibration Reminder
Do Not
Corrosive
Warning
DOWN (LOW ALARM) Key
UP (HIGH ALARM) Key
ON/OFF Key Silent Key
Smart Alarm Key
Backlight Key
High Alarm Indicator Low Alarm Indicator
Alarm Silence
Indicator
Sleep Mode Indicator
Smart Alarm Mode
Indicator
Low Battery
Indicator
BAT
CAL (Calibration Key)
CAL
Unlock Key
Type B Applied
Parts
Direct
Current
Meets ETL
standards
9700630
Storage Temperature Range
122˚F
50˚C
5˚F
-15˚C
Do not throw away. Follow local
guidelines for disposal.
Do not throw away. Follow local
guidelines for disposal.
Conforms to EU requirements
For use in dry indoor locations
Federal law (USA) restricts this device
to sale by or on order of a physician
only
Combined UL / CSA Mark
InletOutlet
AIR/O
2
Oxygen Encriched Air
SN
Serial Number
Use No Oil
%0
2
Oxygen
Percent
Read Flow At Center Of Ball
Below 18%
Alarm Indicator
To Next Page
Loading...
Need help?
General