16026268 B–4 ©2005 Maytag Services
Control Panel
Aut o Cook
1 lb .
1 2 3
4 5 6
7
8
9
0
POPCORN
POTATO BEVERAGE
FRESH
VEG.
PIZZA
FROZEN
ENTREE
AUTO
DEFROST
EASY
COOK
CLOCK TIMER
PROGRAM
POWER
LEVEL
STOP
CLEAR
START
MORE
LESS
RAPID
DEFROST
CONTROL
SET-UP
ACM1120A* and ACM1420A*
2002 ACM1120A*
SETTING CLOCK
This is a 12 hour clock. When your oven is plugged in for
the first time or when power resumes after a power
interruption, the numbers in the display reset to 0.
1. Press CLOCK pad.
• Display scrolls the words “ENTER TIME OF DAY”.
2. Enter desired time by using the number key pads.
3. Press START pad.
• The clock starts.
TIMER
You can use the TIMER of your oven for purposes other
than food cooking.
1. Press TIMER pad.
• Display scrolls the words
“ENTER TIME IN MIN AND SEC”.
2. Enter desired time, by using number key pads.
3. Press START pad.
EASY COOK
A time-saving pad, this simplified control lets you quickly
set and start microwave cooking without the need to
press the START pad.
• Press EASY COOK pad.
• The oven begins cooking and displays starts
counting down.
NOTE: If EASY COOK pad is pressed, 30 seconds will
be added up to 3 minutes.
After 3 minutes, every time EASY COOK pad is
pressed, 1 minute will be added up to
99 minutes 59 seconds.
TIME COOK
This function allows food to cook for a desired time, and
in order to give you the best results. There are 10 power
level settings in addition to HI-POWER, because many
foods need slower cooking (at less than HI-POWER).
1. Enter desired time, by using number key pads.
2. Press POWER LEVEL pad.
• P-HI appears in the display. This indicates that the
oven is set on HI, unless a different power setting
is chosen.
3. Press a number pad indicating the desired power
level.
• Display shows P-XX, indicating the percentage of
power being used.
4. Press START pad.
• When the cooking time is over, two short and one
long tone sounds. The word “End” is indicated in
the display window. Then the oven shuts itself off.
NOTE: If you do not select the power level, the oven will
operate at power HIGH. To set HI-POWER
cooking, skip steps 2 & 3 above.
Programming Instructions for ACM1120A* and ACM1420A*
To Next Page
Loading...
Need help?
General
