EasyManuals Logo
Home>McIntosh>Speaker System>RS150

McIntosh RS150 User Manual

McIntosh RS150
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
If the Power Sleep Timer is set to OFF, the RS150
will power o into a sleep state after 30 minutes of
non-activity. The RS150 can be woken from sleep
by input from the network (or physically pushing
the Power Button). In a sleep state, the RS150 will
continue to work with devices congured to control
it in your Google Home collection.
The RS150 can be made to immediately enter a
sleep state by pressing and holding the Right Knob
for two seconds. If Power Sleep Timer is set to ON,
the RS150 will enter Standby Mode after 60 minutes
of uninterrupted sleep.
The Startup Volume Limit has two settings:
ON
OFF (default)
When the Startup Volume Limit is ON, upon power
loss or return to play from Sleep or Standby, the rst
playback of the product will start at a low volume
level. When switched to OFF, the product will
resume playback at the last volume level.
The Settings Menu allows you to change settings
for Wired and Wireless network connections.
Select Network Type to see/change settings:
Automatic
Wired
Wireless
If Network Type is set to Automatic, the RS150 will
automatically connect to Wi-Fi when the ethernet
cable is unplugged provided the Wireless connection
has previously been setup. Selecting Wired for
Network Type will limit the RS150 network
connection to the ethernet port connection. Select
Wireless to setup a Wi-Fi network or to restrict the
network connection to Wi-Fi.
If you selected the Network Type of Wireless, the
following submenus appear:
Scan Networks
Display SSID
Network Password
To set up a wireless connection for the RS150:
Select Start Scan
In the Display SSID submenu, select a
wireless network using the up/down arrows
Enter the Network Password for that Network
Select Connect
DHCP can be set to ON (Default) or OFF. If you
change this setting to OFF, you will need to provide
the following information manually:
IP
Netmask
Gateway
DNS (1st and 2nd)
With DHCP ON, this information is automatically
acquired and the submenus to enter the information
are not visible.
Figure 8 SETTINGS submenu

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the McIntosh RS150 and is the answer not in the manual?

McIntosh RS150 Specifications

General IconGeneral
BrandMcIntosh
ModelRS150
CategorySpeaker System
LanguageEnglish

Related product manuals