124
Controls in detail
Control system
Submenus in the Settings menu
왘 Press button k or j.
In the display you see the collection of
the submenus.
왘 Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with the ç button, scroll up
with the æ button.
Move within the submenus with the k
or j button to the individual functions.
The settings themselves are made with
button æ or ç.
Resetting the functions of a submenu
For each submenu you can reset all the
functions to the factory settings.
왘 Move to a function in the submenu.
왘 Press the reset button (컄 page 22) in
the instrument cluster for approxi-
mately three seconds.
In the display you will see the request
to press the reset button again to
confirm.
왘 Press the reset button again.
All functions of the submenu will reset
to factory settings.
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button a second
time. Approximately five seconds after
pressing the reset button for the
second time, the
SETTINGS...
menu
reappears in the display.
To Next Page
Loading...
Need help?
General
