97
Controls in detail
Seats
Installing rear seat head restraints
왘 Insert head restraint and push it down
until it engages.
왘 Push button 1 and adjust head
restraint to desired position.
Multicontour seat*
This multicontour seat has a movable seat
cushion and inflatable air cushions built
into the backrest to provide additional
lumbar and side support.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with switches on the right
side of the seat after starting the engine.
1 Seat cushion depth
2 Backrest bottom
3 Backrest center
4 Backrest side bolster adjustment
왘 Start the engine.
Seat cushion depth
왘 Adjust the seat cushion depth to the
length of your upper leg using
switch 1.
Backrest contour
왘 Adjust the contour of the backrest to
the desired position using switches 2
and 3.
Backrest side bolsters
왘 Adjust the backrest side bolsters so
that they provide good lateral support
using switch 4.
To Next Page
Loading...
Need help?
General
