186
Controls in detail
Audio system
Cassette operation
Playing cassettes
왘 Press 3 button.
The display panel folds down and the
cassette compartment becomes ac-
cessible.
왘 Insert cassette into the cassette com-
partment until it engages and tap it
gently.
The cassette will be pulled in automati-
cally. The system switches to cassette
mode. Side 1 will be played and
SIDE 1
appears in the display. Side 1 is the
side of the cassette which is facing up-
ward. The cassette deck will automati-
cally detect the type of tape.
왘 Fold display panel back up and press
gently on the display panel frame to
lock it in place.
or
왘 If a cassette is already in the
mechanism, press j button.
Track selection
왘 Press the
TRK
key.
The current track will be displayed as
SIDE 1
or
SIDE 2
.
왘 You can switch sides at any time.
The side will be changed automatically
at the end of the tape.
!
Do not press directly on the display
face. Otherwise the display will be
damaged.
i
A warning signal will sound after 20
seconds if the display panel is left in
the down position. Fold display panel
back up. If the display panel is not
closed, a warning signal will sound and
the radio will be muted.
To Next Page
Loading...
Need help?
General
