315
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp assemblies
왘 Switch off lights.
왘 Open trunk lid.
1 Locking lever
왘 Fold trim to the side.
왘 Turn locking lever 1 to vertical
position and remove bulb carrier.
2 Rear fog lamp, driver’s side
3 Back up lamp
4 Stop lamp
5 Turn signal lamp
6 Tail, parking, standing and side marker
lamp
왘 Gently push bulb into socket, turn
counterclockwise and pull out.
왘 Insert new bulb and turn clockwise.
왘 Reinstall bulb socket.
왘 Reinstall bulb holder and close trim
panel.
License plate lamp
1 Screw
왘 Switch off the lights.
왘 Loosen both screws 1 and remove
lamp.
왘 Replace the tubular lamp and reinstall
lamp.
왘 Retighten the screws.
To Next Page
Loading...
Need help?
General
