314
Practical hints
Replacing bulbs
왘 Twist bayonet socket 5 counterclock-
wise to the stop (do not remove).
왘 Pull the bulb out of the socket.
왘 Insert the new bulb so that the base
locates in the recess in bayonet
socket 5.
왘 Twist bayonet socket clockwise until
you hear it snap into place.
왘 Plug the connector onto the bulb.
왘 Align lamp cover 2 and click into
place.
Front turn signal lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 252).
왘 Twist bulb socket 1 counterclockwise
and pull out.
왘 Push bulb into socket, turn counter-
clockwise and remove.
왘 Insert new bulb in socket, push in and
twist clockwise.
왘 Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 252).
왘 Press the clamp and remove headlamp
cover 2.
왘 Pull out bulb socket 6 with the bulb.
왘 Pull the bulb out of bulb socket.
왘 Insert a new bulb in the socket.
왘 Reinstall bulb socket.
왘 Align headlamp cover 2 and click into
place.
Side marker lamp bulb
왘 Switch off the lights.
왘 Carefully slide lamp towards rear.
왘 Remove front end first.
왘 Twist bulb socket counterclockwise
and pull out.
왘 Pull bulb out of the bulb socket.
왘 Insert new bulb in socket.
왘 Reinstall bulb socket, push in and twist
clockwise.
왘 To reinstall lamp, set rear end in
bumper and let front end snap into
place.
컄컄
To Next Page
Loading...
Need help?
General
