137
Controls in detail
Control system
Fuel consumption statistics after start
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the
display:
AFTER START
.
1 Distance driven since start
2 Time elapsed since start
3 Average fuel consumption since start
4 Average speed since start
Fuel consumption since last reset
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the
display:
AFTER RESET
.
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last
reset
4 Average speed since last reset
Resetting fuel consumption statistics
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
왘 Press and hold the reset button in the
instrument cluster (
컄 page 22) until
the value is reset to
0
.
i
All statistics stored since the last
engine start will be reset approximately
four hours after the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
Resetting will not occur if you turn the
SmartKey back to position 1 or 2
within this time period.
To Next Page
Loading...
Need help?
General
